Document
ACPL-061L, ACPL-C61L and ACNW261L Ultra Low Power 10 MBd Digital CMOS Optocoupler
Data Sheet
Description
The ACPL-061L/ACPL-C61L/ACNW261L is an optically coupled optocoupler that combines an AlGaAs light emitting diode and an integrated high gain photo detector addresses the low power need. The optocoupler consumes extremely low power, at maximum 1.5 mA IDD per channel across temperature. The forward current is as low as 1.6 mA to 4 mA and allows direct current drive by most microprocessors.
These optocouplers support both 3.3 V and 5 V supply voltage with guaranteed AC and DC operational parameters from temperature range -40° C to +105° C. The output of the detector IC is a CMOS output. An enable input allows the detector output to be strobed. The internal Faraday shield provides a guaranteed common mode transient immunity specification of 20 kV/μs.
The CMOS output is slew-rate controlled and is designed to allow the rise time and fall time to be controlled over a wide range of the load capacitance.
This unique design provides maximum AC and DC circuit isolation while achieving TTL/CMOS compatibility. These optocouplers are suitable for high speed logic interfacing, while consuming extremely low power.
Functional Diagram
NC 1 Anode 2
Cathode 3 NC 4
Shield
8 VDD 7 VE 6 VO 5 GND
TRUTH TABLE (POSITIVE LOGIC)
LED ENABLE OUTPUT
ON
H
L
OFF
H
H
ON
L
Z
OFF L
Z
ON NC
L
OFF NC
H
Features
• Ultra low current IDD consumption: 1.5 mA max • Low input current capability: 1.6 mA min (ACPL-061L),
3 mA min (ACPL-C61L), 4 mA min (ACNW261L)
• Available packages: SO-8, Stretched SO-8 and 400 mil widebody
• Built-in slew-rate controlled output • Tri-state output with enable pin VE • 20 kV/μs minimum Common Mode Rejection (CMR) at
VCM = 1000 V • High Speed: 10 MBd min • Guaranteed AC and DC performance over wide
temperature: -40° C to +105° C
• Safety and Regulatory Approval – UL 1577 recognized – 3750 Vrms for 1 minute for ACPL-061L and 5000 Vrms for 1 minute for ACPL-C61L/ACNW261L – CSA Approval – IEC/EN/DIN EN 60747-5-5 Approval for Reinforced Insulation
Applications
• Communication Interface: RS485, CANBus, I2C • Microprocessor System Interfaces • Digital isolation for A/D, D/A conversion
A 0.1 μF bypass capacitor must be connected between pins VDD and GND
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments.
Ordering Information
ACPL-061L is UL Recognized with 3750 Vrms for 1 minute per UL1577. ACPL-C61L and ACNW261L are UL Recognized with 5000 Vrms for 1 minute per UL1577.
Option
Part number ACPL-061L
ACPL-C61L
ACNW261L
(RoHS Compliant) Package
-000E
SO-8
-060E
-500E
-560E
-000E -060E
Stretched SO-8
-500E
-560E
-000E -300E
400 mil DIP-8
-500E
Surface Mount
X X X X X X X X
Gull Wing
X
X
X
X
Tape & Reel
X X
X X
X
UL 1577 5000 Vrms / IEC/EN/DIN EN 1 Minute rating 60747-5-5 Quantity
100 per tube
X
100 per tube
1500 per reel
X
1500 per reel
X
80 per tube
X
X
80 per tube
X
1000 per reel
X
X
1000 per reel
X
X
42 per tube
X
X
42 per tube
X
X
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry.
Example 1: ACPL-061L-560E to order product of Small Outline SO-8 package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
2
Package Outline Drawing ACPL-061L SO-8 Package
LAND PATTERN RECOMMENDATION
3.937 ± 0.127 (0.155 ± 0.005)
8765
DEVICE PART NUMBER
NNNN Z
LEAD-FREE PIN 1
•
YYWW EEE
1234
TEST RATING CODE
DATE CODE LOT ID
5.994 ± 0.203 (0.236 ± 0.008)
0.406 ± 0.076 (0.016 ± 0.003)
1.270 (0.050)
BSC
* 5.080 ± 0.127 (0.200 ± 0.005)
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
7°
45° X
0.432 (0.017)
3.175 ± 0.127 (0.125 ± 0.005)
1.524 (0.060)
0 ~ 7°
0.228 ± 0.025 (0.009 ± 0.001)
* Total package length (inclusive of mold ash) 5.207 ± 0.254 (0.205 ± 0.010)
Notes: Lead coplanarity = 0.10 mm (0.004 inches) max. Floating lead protrusion is 0.15 mm (6 mils) max. Option number 500 not marked
Dimensions in Millimeters (Inches)
ACPL-C61L Stretched SO-8 Package
0.203 ± 0.102
(0.008 ± 0.004)
0.305 (0.012)
MIN.
5.850±0.254 (0.230±0.010)
LAND PATTERN RECOMMENDATION
8765
ROHS-COMPLIANCE INDICATOR
NNNN YYWW EEE
1234
PART NUMBER
DATE CODE Lot ID
6.807±0.127 (0.268±0.005)
1.905 (0.1)
7° 1.270 (0.050) BSG
3.180±0.127 (0.125±0.005)
0.450 (0.018)
0.381±0.13 (0.015±0.005)
Dimensions in Millimeters (Inches). Lead coplanarity = 0.1 mm (0.004 inches).
3
12.650 (0.5)
7°
45°
0.750±0.250 (0.0295±0.0.