ATmega328PB

ATmega328PB AVR® Microcontroller with Core Independent Peripherals and PicoPower® Technology Introduction The picoPower® ATmega328PB is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328PB achieves throughputs close to 1 MIPS per MHz. This empowers system designers to optimize the device for power consumption versus processing speed. Features High Performance, Low-Power AVR® 8-bit Microcontroller Family Advanced RISC Architecture – 131 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz – On-Chip 2-Cycle Multiplier High Endurance Nonvolatile Memory Segments – 32 KB of In-System Self-Programmable Flash program memory – 1 KB EEPROM – 2 KB Internal SRAM – Write/Erase Cycles: 10,000 Flash/100,000 EEPROM – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security Peripheral Features – Peripheral Touch Controller (PTC) Capacitive Touch Buttons, Sliders, and Wheels 24 Self-Cap Channels and 144 Mutual Cap Channels – Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode – Three 16-bit Timer/Counters with Separate Prescaler, Compare Mode, and Capture Mode – Real-Time Counter with Separate Oscillator – Ten PWM Channels – 8-channel 10...