Simultaneous Sampling A/D Converter
ADC122S625
www.ti.com
SNAS451A – FEBRUARY 2008 – REVISED MARCH 2013
ADC122S625 Dual 12-Bit, 50 kSPS to 200 kSPS, Simu...
Description
ADC122S625
www.ti.com
SNAS451A – FEBRUARY 2008 – REVISED MARCH 2013
ADC122S625 Dual 12-Bit, 50 kSPS to 200 kSPS, Simultaneous Sampling A/D Converter
Check for Samples: ADC122S625
FEATURES
1
23 True Simultaneous Sampling Differential Inputs
Specified Performance from 50 kSPS to 200 kSPS
External Reference Wide Input Common-Mode Voltage Range Single High-Speed Serial Data Output Operating Temperature Range of −40°C to
+105°C SPI™/ QSPI™/MICROWIRE/DSP Compatible
Serial Interface
APPLICATIONS
Motor Control Power Meters/Monitors Multi-Axis Positioning Systems Instrumentation and Control Systems Data Acquisition Systems Medical Instruments Direct Sensor Interface
KEY SPECIFICATIONS
Conversion Rate: 50 kSPS to 200 kSPS INL: ±1 LSB (max) DNL: ±0.95 LSB (max) SNR: 71 dBc (min) THD: -72 dBc (min) ENOB: 11.25 bits (min) Power Consumption at 200 kSPS
– Converting, VA = 5V, VREF = 2.5V: 8.6 mW (typ)
– Power-Down, VA = 5V, VREF = 2.5V: 2.6 µW (typ)
DESCRIPTION
The ADC122S625 is a dual 12-bit, 50 kSPS to 200 kSPS simultaneous sampling Analog-to-Digital (A/D) converter. The analog inputs on both channels are sampled simultaneously to preserve their relative phase information to each other. The converter is based on a successive-approximation register architecture where the differential nature of the analog inputs is maintained from the internal trackand-hold circuits throughout the A/D converter to provide excellent common-mode signal rejection. ...
Similar Datasheet