Positive Voltage Hotswap Controller and I2C Current Monitor
www.ti.com
TPS2480 TPS2481
SLUS939B – APRIL 2010 – REVISED DECEMBER 2010
Positive Voltage Intelligent Protection Device...
Description
www.ti.com
TPS2480 TPS2481
SLUS939B – APRIL 2010 – REVISED DECEMBER 2010
Positive Voltage Intelligent Protection Device Hotswap Controller and I2C Current Monitor
Check for Samples: TPS2480, TPS2481
FEATURES
1
Programmable FET Power Limit External N-Channel FET Gate Drive Programmable Fault Timer Open Drain Power Good Output I2C monitoring of Current, Voltage and Power High Accuracy Current Monitoring
(1% over temperature) Dynamic Calibration 9-V to 26-V Input Range
APPLICATIONS
Servers Hard Drives Storage Networks Base Stations
DESCRIPTION
The TPS2480/81 are designed to minimize inrush into applications and protect both the load and the FET from over-current or short circuit events. They control an external N-channel MOSFET switch and provide accurate voltage, current, and power monitoring using a configurable 12 bit A/D converter via an I2C interface. The independently adjustable power limit and current limit ensure that the external MOSFET operates within the FET's Safe Operating Area (SOA).
The flexible design includes a Power Good output which can be used for sequencing as well as load fault indication. An external timer capacitor can set the fault time to help immunize the system from nuisance shutdowns during brief transient events.
The monitoring circuitry incorporates a high accuracy A/D converter which can be configured from a 9 to 13 bit converter. The internal gain of the A/D can be configured to scale the current, voltage and power read...
Similar Datasheet