TPS27S100

Product Folder Order Now Technical Documents Tools & Software Support & Community TPS27S100 SLVSE42B – OCTOBER 2017 – REVISED SEPTEMBER 2019 TPS27S100x 40-V, 4-A, 80-mΩ Single-Channel High-Side Switch 1 Features 1 80-mΩ Single-channel High-side switch with full diagnostics – TPS27S100A: Open-drain status output – TPS27S100B: Current monitor analog output Wide operating voltage 3.5 V to 40 V Very-low standby current, <0.5 µA Operating junction temperature, –40 to 150°C Input control, 3.3-V and 5-V logic compatible High-accuracy current monitor, ±30 mA at 1 A Adjustable current limit (0.5-A to 6-A) with external resistor, ±20% at 0.5 A Diagnostic enable function for multiplexing of MCU, analog or digital interface Excellent ESD protection on IN and OUT pins – ±16 kV IEC 61000-4-2 ESD contact discharge – ±4 kV IEC 61000-4-4 Electrical fast transient – ±1.0 kV/42 Ω IEC 61000-4-5 Surge Protection – Overload and short-circuit-to-GND protection – Inductive load negative voltage clamp – Undervoltage lockout (UVLO) protection – Thermal shutdown and swing with self recovery – Loss of GND protection Diagnostic – On- and Off-State output Open-Load / short to supply detection – Overload and short to ground detection – Thermal shutdown and swing detection Thermally-Enhanced 14-Pin PWP or 16-Pin QFN package 2 Applications Programmable logic controller Building automation Telecom/networks 3 Description The TPS27S100x is a single-channel, fully-protected, ...