Typical Size (6,3 mm x 6,4 mm)
www.ti.com
TPS54110−Q1
SLVS837 − JULY 2008
3-V TO 6-V INPUT, 1.5-A OUTPUT SYNCHRONOUS-...
Typical Size (6,3 mm x 6,4 mm)
www.ti.com
TPS54110−Q1
SLVS837 − JULY 2008
3-V TO 6-V INPUT, 1.5-A OUTPUT SYNCHRONOUS-BUCK PWM SWITCHER WITH INTEGRATED FETs (SWIFT)
FEATURES D Qualified for Automotive Applications D Integrated MOSFET Switches for High
Efficiency at 1.5-A Continuous Output Source or Sink Current
D 0.9-V to 3.3-V Adjustable Output Voltage With
1% Accuracy
D Externally Compensated for Design Flexibility D Fast Transient Response D Wide PWM Frequency: Fixed 350 kHz,
550 kHz, or Adjustable 280 kHz to 700 kHz
D Load Protected by Peak Current Limit and
Thermal Shutdown
D Integrated Solution Reduces Board Area and
Total Cost
APPLICATIONS D Low-Voltage, High-Density Systems With
Power Distributed at 5 V or 3.3 V
D Point of Load Regulation for High
Performance DSPs, FPGAs, ASICs, and Microprocessors
D Broadband, Networking, and Optical
Communications Infrastructure
D Portable Computing/Notebook PCs
DESCRIPTION
As members of the SWIFT family of dc/dc
regulators, the TPS54110 low-input-voltage high-output-current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high-performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power-good output useful for processor/logic rese...