DatasheetsPDF.com

TPS77615-EP Dataheets PDF



Part Number TPS77615-EP
Manufacturers Texas Instruments
Logo Texas Instruments
Description LDO Voltage Regulators
Datasheet TPS77615-EP DatasheetTPS77615-EP Datasheet (PDF)

TPS77601ĆEP, TPS77615ĆEP, TPS77618ĆEP, TPS77625ĆEP TPS77628ĆEP, TPS77633ĆEP WITH PG OUTPUT FASTĆTRANSIENTĆRESPONSE 500ĆmA LOWĆDROPOUT VOLTAGE REGULATORS SGLS176A − AUGUST 2003 − REVISED MARCH 2007 D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Extended Temperature Performance of −40°C to 125°C D Enhanced Diminishing Manufacturing Sources (DMS) Support D Enhanced Product Change Notification D Qualification Pedigree† D Open Drain Power Good D 500-mA Low-Dropout Voltage Reg.

  TPS77615-EP   TPS77615-EP



Document
TPS77601ĆEP, TPS77615ĆEP, TPS77618ĆEP, TPS77625ĆEP TPS77628ĆEP, TPS77633ĆEP WITH PG OUTPUT FASTĆTRANSIENTĆRESPONSE 500ĆmA LOWĆDROPOUT VOLTAGE REGULATORS SGLS176A − AUGUST 2003 − REVISED MARCH 2007 D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Extended Temperature Performance of −40°C to 125°C D Enhanced Diminishing Manufacturing Sources (DMS) Support D Enhanced Product Change Notification D Qualification Pedigree† D Open Drain Power Good D 500-mA Low-Dropout Voltage Regulator D Available in 1.5-V, 1.8-V, 2.5-V, 2.8-V, 3.3-V Fixed Output and Adjustable Versions D Dropout Voltage to 169 mV (Typ) at 500 mA (TPS77633) † Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. D Ultralow 85 µA Typical Quiescent Current D Fast Transient Response D 2% Tolerance Over Specified Conditions for Fixed-Output Versions D 20-Pin TSSOP PowerPAD (PWP) Package D Thermal Shutdown Protection PWP PACKAGE (TOP VIEW) GND/HSINK 1 GND/HSINK 2 GND 3 NC 4 EN 5 IN 6 IN 7 NC 8 GND/HSINK 9 GND/HSINK 10 20 GND/HSINK 19 GND/HSINK 18 NC 17 NC 16 PG 15 FB/NC 14 OUT 13 OUT 12 GND/HSINK 11 GND/HSINK NC − No internal connection description The TPS776xx devices are designed to have a fast transient response and be stable with a 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 169 mV at an output current of 500 mA for the TPS77633) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 500 mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 1 µA at TJ = 25°C. Power good (PG) of the TPS776xx is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS776xx are offered in 1.5-V, 1.8-V, 2.5-V, 2.8 V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V for TPS77601 option). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS776xx family is available in 20 pin TSSOP package. Please be aware that an important notice concerning availability, stan.


TPS77601-EP TPS77615-EP TPS77618-EP


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)