FSA3031 — Dual High-Speed USB2.0 Switch with Mobile High-Definition Link (MHL™) Switch
November 2012
FSA3031 — Dual Hi...
FSA3031 — Dual High-Speed USB2.0 Switch with Mobile High-Definition Link (MHL™) Switch
November 2012
FSA3031 — Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL™)
Features
Low On Capacitance: 4.6 pF/6.75 pF MHL/USB
(Typical)
Low Power Consumption: 30 μA Maximum Supports MHL Rev. 2.0 Passes 1080 p/60 fps (3 Gbps) MHL Data Eye
Diagram Mask Compliance
MHL Data Rate: ≥4.7Gbps with Ideal Input Source Packaged in 12-Lead UMLP (1.8 x 1.8 mm) Over-Voltage Tolerance (OVT) on all USB Ports
Up to 5.25 V without External Components
Applications
Cell Phones and Digital Cameras
IMPORTANT NOTE:
For additional performance information, please contact
[email protected].
Description
The FSA3031 is a bi-directional, low-power, high-speed, 3:1, dual USB2.0 and MHL switch. Configured as a double-pole, triple-throw (DP3T) switch; it is optimized for switching between dual high- or full-speed USB and Mobile High-Definition Link sources (MHL™ Rev. 2.0 specification).
The FSA3031 contains special circuitry on the switch I/O pins, for applications where the VCC supply is powered off (VCC=0), that allows the device to withstand an over-voltage condition. This switch is designed to minimize current consumption even when the control voltage applied to the control pins is lower than the supply voltage (VCC). This feature is especially valuable to mobile applications, such as cell phones; allowing direct interface with the general-purpose I/Os of the baseband process...