Document
isc Triacs
FSM25C2
FEATURES ·With TO-220AB insulated package ·Suitables for general purpose AC switching. Which can be used as an ON/OFF function in applications such as static relays, heating regulation,induction motor starting circuits. Or for phase control operation in light dimmers, motor speed controllers etc. ·Minimum Lot-to-Lot variations for robust device
performance and reliable operation
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
SYMBOL
PARAMETER
VDRM VRRM IT(RMS) ITSM
Tj Tstg Rth(j-c)
Repetitive peak off-state voltage Repetitive peak off-state voltage RMS on-state current (full sine wave)Tj=80℃ Non-repetitive peak on-state current tp=20ms Operating junction temperature Storage temperature Thermal resistance, junction to case
MIN
200 200 25 250 125 -40~125 2.3
UNIT
V V A A ℃ ℃ ℃/W
ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)
SYMBOL
PARAMETER
CONDITIONS
MIN
IRRM
Repetitive peak reverse current
VR=VRRM,Tj=25℃ VR=VRRM, Tj=125℃
--
IDRM
Repetitive peak off-state current
VD=VDRM,Tj=25℃ VD=VDRM, Tj=125℃
--
Ⅰ
--
IGT Gate trigger current
Ⅱ
VD=12V; RL= 33Ω
--
Ⅲ
--
IH
Holding current
IGT= 500mA, Gate Open
--
VGT Gate trigger voltage all quadrant VD=12V; RL= 33Ω
--
VTM On-state voltage
IT= 14A; tp= 380μs
--
MAX
0.01 2
0.01 2 50 50 50
60
1.7
1.55
UNIT
mA mA
mA
mA V V
isc website:www.iscsemi.com
isc & iscsemi is registered trademark
isc Triacs
FSM25C2
NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
isc website:www.iscsemi.com
isc & iscsemi is registered trademark
.