NV25040

NV25010, NV25020, NV25040 EEPROM Serial 1/2/4-Kb SPI Automotive Grade 0 Description NV25010, NV25020 and NV25040 are EEPROM Serial 1/2/4−Kb SPI Automotive Grade 0 devices internally organized as 128x8, 256x8 and 512x8 bits. They feature a 16−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The devices are enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV250x0 device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected. Features Automotive AEC−Q100 Grade 0 (−40°C to +150°C) Qualified 2.5 V to 5.5 V Supply Voltage Range 10 MHz SPI Compatible SPI Modes (0,0) & (1,1) 16−byte Page Write Buffer Self−timed Write Cycle Hardware and Software Protection Additional Identification Page with Permanent Write Protection NV Prefix for Automotive and Other Applications Requiring Site and Change Control Block Write Protection − Protect 1/4, 1/2 or Entire EEPROM Array Low Power CMOS Technology Program/Erase Cycles: − 4,000,000 at 25°C − 1,200,000 at +85°C − 600,000 at +125°C − 300,000 at +150°C 200 Year Data Ret...