Rail-to-Rail Input and Output voltage feedback Amplifiers
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LMH6645, LMH6646, LMH6647
SNOS...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LMH6645, LMH6646, LMH6647
SNOS970D – JUNE 2001 – REVISED NOVEMBER 2014
LMH664x 2.7 V, 650 μA, 55 MHz, Rail-to-Rail Input and Output Amplifiers with Shutdown Option
1 Features
1 (VS = 2.7V, TA = 25°C, RL = 1kΩ to V+/2, AV = +1. Typical Values Unless Specified.
−3dB BW 55 MHz Supply Voltage Range 2.5 V to 12 V Slew Rate 22 V/μs Supply Current 650 μA/channel Output Short Circuit Current 42 mA Linear Output Current ±20 mA Input Common Mode Voltage 0.3 V Beyond Rails Output Voltage Swing 20 mV from Rails Input Voltage Noise 17 nV/√Hz Input Current Noise 0.75 pA/√Hz
2 Applications
Active Filters High Speed Portable Devices Multiplexing Applications (LMH6647) Current Sense Buffer High Speed Transducer Amp
3 Description
The LMH6645 (single) and LMH6646 (dual), rail-torail input and output voltage feedback amplifiers, offer high speed (55 MHz), and low voltage operation (2.7 V) in addition to micro-power shutdown capability (LMH6647, single).
Input common mode voltage range exceeds either supply by 0.3 V, enhancing ease of use in multitude of applications where previously only inferior devices could be used. Output voltage range extends to within 20 mV of either supply rails, allowing wide dynamic range especially in low voltage applications. Even with low supply current of 650 μA/amplifier, output current capability is kept at a respectable ±20 mA for driving hea...
Similar Datasheet