Triple Operational Amplifier
LMH6733
www.ti.com
SNOSAW0D – JANUARY 2007 – REVISED MAY 2013
LMH6733 Single Supply, 1.0 GHz, Triple Operational Ampl...
Description
LMH6733
www.ti.com
SNOSAW0D – JANUARY 2007 – REVISED MAY 2013
LMH6733 Single Supply, 1.0 GHz, Triple Operational Amplifier
Check for Samples: LMH6733
FEATURES
1
2 Supply Range 3 to 12V Single Supply Supply Range ±1.5V to ±6V Split Supply 1.0 GHz −3 dB Small Signal Bandwidth
– (AV = +1, VS = ±5V) 650 MHz −3 dB Small Signal Bandwidth
– (AV = +2, VS = 5V) Low Supply Current (5.5 mA per op Amp, VS =
5V) 2.1 nV/√Hz Input Noise Voltage 3750 V/μs Slew Rate 70 mA Linear Output Current CMIR and Output Swing to 1V from Each
Supply Rail
APPLICATIONS
HDTV Component Video Driver High Resolution Projectors Flash A/D Driver D/A Transimpedance Buffer Wide Dynamic Range IF Amp Radar/Communication Receivers DDS Post-Amps Wideband Inverting Summer Line Driver
DESCRIPTION
The LMH6733 is a triple, wideband, operational amplifier designed specifically for use where high speed and low power are required. Input voltage range and output voltage swing are optimized for operation on supplies as low as 3V and up to ±6V. Benefiting from TI’s current feedback architecture, the LMH6733 offers a gain range of ±1 to ±10 while providing stable operation without external compensation, even at unity gain. These amplifiers provide 650 MHz small signal bandwidth at a gain of 2 V/V , a low 2.1 nV/√Hz input referred noise and only consume 5.5 mA (per amplifier) from a single 5V supply.
The LMH6733 is offered in a 16-Pin SSOP package with flow through pinout for ease of layout...
Similar Datasheet