Programmable Differential Amplifier
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LMH6882
SNOSC84D – AUGUST 2012...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
LMH6882
SNOSC84D – AUGUST 2012 – REVISED FEBRUARY 2015
LMH6882 DC to 2.4-GHz, High-Linearity, Dual, Programmable Differential Amplifier
OIP3 (dBm)
1 Features
1 Small Signal Bandwidth: 2400 MHz OIP3 @ 100 MHz: 42 dBm HD3 @ 100 MHz: −100 dBc Noise Figure: 9.7 dB Voltage Gain: 26 dB to 6 dB Voltage Gain Step Size: 0.25 dB Input Impedance: 100 Ω Parallel and Serial Gain Control Power Down Capability
2 Applications
Microwave Backhaul Radio Receiver Zero IF Sampling In-Phase/Quadrature (I/Q) Sampling Medical Imaging RF/IF and Baseband Gain Blocks Differential Cable Driver
OIP3 vs Voltage Gain
50
45
40
35
30
25 f = 100 MHz POUT= 4dBm / Tone
20 6 8 10 12 14 16 18 20 22 24 26 VOLTAGE GAIN (dB)
3 Description
The LMH6882 is a high-speed, high-performance programmable differential amplifier. With a bandwidth of 2.4 GHz and high linearity of 42 dBm OIP3, the LMH6882 is suitable for a wide variety of signal conditioning applications.
The LMH6882 programmable differential amplifier combines the best of both fully differential amplifiers and variable-gain amplifiers. The device offers superior noise and distortion performance over the entire gain range without external resistors, enabling the use of just one device and one design for multiple applications requiring different gain settings.
The LMH6882 is an easy-to-use amplifier that can replace both fully differential, f...
Similar Datasheet