Variable Gain Amplifier
LMH6504
www.ti.com
SNOSA96D – NOVEMBER 2003 – REVISED MARCH 2013
LMH6504 Wideband, Low Power, Variable Gain Amplifier...
Description
LMH6504
www.ti.com
SNOSA96D – NOVEMBER 2003 – REVISED MARCH 2013
LMH6504 Wideband, Low Power, Variable Gain Amplifier
Check for Samples: LMH6504
FEATURES
1
23 VS = ±5V, TA = 25°C, RF = 1 KΩ, RG = 100Ω, RL = 100Ω, AV = AVMAX = 9.7V/V, Typical values unless specified.
−3 dB BW 150 MHz Gain control BW 150 MHz Adjustment range (<10 MHz) 80 dB Output offset voltage ±55 mV Gain matching (limit) ±0.42 dB Supply voltage range 7V to 12V Slew rate (inverting) 1500 V/μs Supply Current (no load) 11 mA Linear Output Current ±60 mA Output Voltage Swing ±2.2V Input Noise Voltage 4.4 nV/√Hz Input Noise Current 2.6 pA/√Hz THD (20 MHz, RL = 100Ω, VO = 2 VPP) −45 dBc Replacement for CLC5523
APPLICATIONS
Variable attenuator AGC Voltage controlled filter Video imaging processing
DESCRIPTION
The LMH™6504 is a wideband DC coupled voltage controlled gain stage followed by a high-speed current feedback Op Amp which can directly drive a low impedance load. Gain adjustment range is 80 dB for up to 10 MHz by varying the gain control input voltage, VG.
Maximum gain is set by external components, and the gain can be reduced all the way to cut-off. Power consumption is 110 mW with a speed of 150 MHz and a gain control bandwidth (BW) of 150 MHz. Output referred DC offset voltage is less than 55 mV over the entire gain control voltage range. Device-todevice gain matching is within ±0.42 dB at maximum gain. Furthermore, gain is tested over a wide range. The output cur...
Similar Datasheet