CAT6242
1.3 Amp CMOS LDO Voltage Regulator
Description
The CAT6242 is a low dropout CMOS voltage regulator providing up...
CAT6242
1.3 Amp CMOS LDO Voltage
Regulator
Description
The CAT6242 is a low dropout CMOS voltage
regulator providing up to 1300 mA of output current with fast response to load current and line voltage changes. CAT6242 has a fixed output voltage that is factory programmable to a level between 1.1 V and 4.1 V with steps of 0.1 V. Other fixed values in the range are available on demand. CAT6242 is packaged in a space saving 3 mm x 3 mm WDFN−6 package with a power pad for heat sinking to the PCB.
Features
Guaranteed 1300 mA Continuous Output Current Wide Range of Output Voltages Available On Request:
1.1 V to 4.1 V in 100 mV Steps
Low Dropout Voltage of Maximum 350 mV at 1.3 A for VOUT =
3.3 V
±1.0% Output Voltage Accuracy, ±2.0% Over Temperature No−load Ground Current of 70 mA Typical Full−load Ground Current of 160 mA Typical “Zero” Current Shutdown Mode Under Voltage Lockout Stable with Ceramic Output Capacitors Current Limit and Thermal Protection 3 mm x 3 mm WDFN−6 Power Package These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
DSP Core and I/O Voltages FPGAs, ASICs PDAs, Mobile Phones, GPS Camcorders and Cameras Hard Disk Drives
http://onsemi.com
WDFN−6 3 x 3 mm CASE 511AP
PIN CONNECTIONS
1
EN
VIN
GND
SENSE
BYP
VOUT
(Top View)
MARKING DIAGRAM
62XX LAAA YWW
G
1 (WDFN−6)
62XX L AAA Y WW G
= Specific Device Code = Assembly Location Code = Assembly Lot Number (Last Three Digits) = Prod...