NCV5702

NCV5702 High Current IGBT Gate Driver The NCV5702 is a high−current, high−performance stand−alone IGBT driver for high power applications that include solar inverters, motor control and uninterruptible power supplies. The device offers a cost−effective solution by eliminating many external components. Device protection features include Active Miller Clamp, accurate UVLO, EN input, DESAT protection and Active open−drain FAULT output. The driver also features an accurate 5.0 V output and separate high and low (VOH and VOL) driver outputs for system design convenience. The driver is designed to accommodate a wide voltage range of bias supplies including unipolar and bipolar voltages. It is available in a 16−pin SOIC package. Features High Current Output (+4/−6 A) at IGBT Miller Plateau Voltages Low Output Impedance of VOH & VOL for Enhanced IGBT Driving Short Propagation Delays with Accurate Matching Direct Interface to Digital Isolator/Opto−coupler/Pulse Transformer for Isolated Drive, Logic Compatibility for Non−isolated Drive Active Miller Clamp to Prevent Spurious Gate Turn−on DESAT Protection with Programmable Delay Enable Input for Independent Driver Control Tight UVLO Thresholds for Bias Flexibility Wide Bias Voltage Range including Negative VEE Capability This Device is Pb−Free, Halogen−Free and RoHS Compliant Typical Applications Motor Control Uninterruptible Power Supplies (UPS) Automotive Power Supplies HEV/EV PTC Heaters www.onsemi.com ...