CS5207−3
7.0 A, 3.3 V Fixed Linear Regulator
The CS5207−3 linear regulator provides 7.0 A @ 3.3 V with an accuracy of ±...
CS5207−3
7.0 A, 3.3 V Fixed Linear
Regulator
The CS5207−3 linear
regulator provides 7.0 A @ 3.3 V with an accuracy of ±2.0 %.
The
regulator is intended for use as post
regulator and microprocessor supply. The fast loop response and low dropout voltage make these
regulators ideal for applications where low voltage operation and good transient response are important.
The circuit is designed to operate with dropout voltages as low as 1.0 V depending on the output current level. The maximum quiescent current is only 10 mA at full load.
The
regulator is fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.
The CS5207−3 is available in TO−220−3 and surface mount D2PAK−3 packages.
Features
Output Current to 7.0 A Output Voltage Trimmed to ±2.0% Dropout Voltage 1.4 V @ 7.0 A Fast Transient Response Fault Protection Circuitry
− Thermal Shutdown − Overcurrent Protection − Safe Area Protection
VOUT VIN
Thermal Shutdown
Bandgap
Output Current
Limit
− + Error Amplifier
Figure 1. Block Diagram
GND
http://onsemi.com
12 3 123
TO−220−3 T SUFFIX CASE 221A
Tab = VOUT Pin 1. GND
2. VOUT 3. VIN
D2PAK−3 DP SUFFIX CASE 418AB
MARKING DIAGRAMS
TO−220−3
D2PAK−3
CS5207−3 AWLYWW
CS5207−3 AWLYWW
1
1
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
ORDERING INFORMATION
Device
Package
Shipping†
CS5207−3GT3
TO−220−3 50 Units/Rail
CS5207−3GDP3 D2PAK−3 50 Units/Rail
C...