Configurable 3.0A PWM Step-Down Converter
Configurable 3.0 A PWM Step Down Converter
NCV91300
The NCV91300 is a synchronous PWM buck converter optimized to suppl...
Description
Configurable 3.0 A PWM Step Down Converter
NCV91300
The NCV91300 is a synchronous PWM buck converter optimized to supply the different sub systems of automotive applications post regulation system from 2.0 V up to 5 V input. The device is able to deliver up to 3.0 A, with programmable output voltage from 0.6 V to 3.3 V. Operation at up to 2.15 MHz switching frequency allows the use of small components. Synchronous rectification and automatic PFM−PWM transitions improve overall solution efficiency. The NCV91300 is housed in low profile 3.0 x 3.0 mm QFNW−16 package.
Features
Power Input Voltage Range from 1.9 V to 5.5 V Analog Input Voltage Range from 3.0 V to 5.5 V Power Capability: 3.0 A at TA = 105°C (RqJA = 40°C/W) Programmable Output Voltage: 0.6 V to 3.3 V in 5 mV, 10 mV and
20 mV Steps
Up to 2.15 MHz Switching Frequency with On Chip Oscillator Spread Spectrum or Sync Input Pin for EMI Optimization Uses 1.0 mH Inductor and at Least 20 mF Capacitors for Optimized
Footprint and Solution Thickness
PFM/PWM Operation for Optimum Efficiency Low 65 mA Quiescent Current I2C Control Interface with Interrupt and Dynamic Voltage Scaling
Support
Enable Pin, Power Good / Interrupt Signaling Thermal Protections and Temperature Management 3.0 x 3.0 mm / 0.5 mm pitch QFN 16 package These are Pb−Free Devices
Typical Applications
Automotive Point Of Load (POL) Automotive Telematics Clusters – Camera Automotive Infotainment − Instrumentation Automotive A...
Similar Datasheet