MICROPOWER DUAL OPERATIONAL AMPLIFIERS
TLV2422, TLV2422A, TLV2422Y Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFI...
Description
TLV2422, TLV2422A, TLV2422Y Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001
D Output Swing Includes Both Supply Rails D Extended Common-Mode Input Voltage
Range . . . 0 V to 4.5 V (Min) With 5-V Single
Supply
D No Phase Inversion D Low Noise . . . 18 nV/√Hz Typ at f = 1 kHz D Low Input Offset Voltage
950 µV Max at TA = 25°C (TLV2422A)
D Low Input Bias Current . . . 1 pA Typ D Micropower Operation . . . 50 µA Per
Channel
D 600-Ω Output Drive D Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
description
The TLV2422 and TLV2422A are dual low-voltage operational amplifiers from Texas Instruments. The common-mode input voltage range for this device has been extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, the devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV2422 only requires 50 µA of supply current per channel, making it ideal for battery-powered applications. The TLV2422 al...
Similar Datasheet