2-Bit Analog-to-Digital Converter
D Supports FLEXt Protocol Pagers With The
TLV5591 FLEX Decoder
D 3-Pole Butterworth Low-Pass Selectable
Dual-Bandwidth A...
Description
D Supports FLEXt Protocol Pagers With The
TLV5591 FLEX Decoder
D 3-Pole Butterworth Low-Pass Selectable
Dual-Bandwidth Audio Filter
– BW 1 = 1 kHz ±5% (– 3 dB) – BW 2 = 2 kHz ±5% (– 3 dB)
D Both Peak and Valley Detectors Available D 2-Bit Analog-to-Digital Converter D Operating Temperature Range . . . –25°C to 85°C
TLV5590 2-BIT ANALOG-TO-DIGITAL CONVERTER
FOR FLEXt PAGER CHIPSET
SLAS134B – NOVEMBER 1995 – REVISED NOVEMBER 1996
D Four Modes of Operation:
– Fast Acquisition – Slow Acquisition – Hold Acquisition – Standby
D 2.7-V to 3.3-V Single Power Supply
Operation
applications
D FLEX Protocol Numeric and
Alphanumeric Pagers
D One-Way or Two-Way
description
D PACKAGE
The TLV5590 analog-to-digital converter is a
(TOP VIEW)
system level solution to interface a 4-level baseband audio signal to a digital decoder. The TLV5590 is a direct interface to the TLV5591BVF† FLEX decoder. Designed primarily for pager applications, the TLV5590 incorporates signal conditioning, both peak and valley detection along with analog-to-digital conversion. A selectable third-order Butterworth filter with cutoff
DVDD 1 AVDD 2
SIG 3 DC OFFSET 4
MID 5 GND 6
BW 7
14 CLK 13 TEST 12 TRACKINH 11 EXTS0 10 EXTS1 9 CON2 8 CON1
frequencies of 1 kHz and 2 kHz is included. The
peak and valley detectors are implemented with a unique design that does not require external capacitors. Two
8-bit digital-to-analog converters (DACs) are used in a feedback loop to automatically adjust to the peak and
valley...
Similar Datasheet