Digital Output MEMS Accelerometer
Data Sheet ADXL367
Micropower, 3-Axis, ±2 g/±4 g/±8 g Digital Output MEMS Accelerometer
FEATURES
FUNCTIONAL BLOCK DIAG...
Description
Data Sheet ADXL367
Micropower, 3-Axis, ±2 g/±4 g/±8 g Digital Output MEMS Accelerometer
FEATURES
FUNCTIONAL BLOCK DIAGRAM
► Supply voltage range ► Single-cell battery operation: 1.1 V to 3.6 V
► Internal power supply regulation for high PSRR ► Ultralow power
► 0.89 µA at 100 Hz ODR, 2.0 V supply
► 180 nA motion activated wake-up mode
► 40 nA standby current ► High resolution: 0.25 mg/LSB ► Built-in features for system level power savings
► Single-tap and double-tap detection with only 35 nA of added current
► Adjustable threshold sleep and wake-up modes for motion activation
► Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely
► Deep 512 sample embedded FIFO minimizes host processor load
► Awake state output enables implementation of motion activated switch
► Low noise to 170 µg/√Hz ► Acceleration sample synchronization via external trigger ► On-chip temperature sensor ► Internal two-pole antialias filter ► SPI (4-wire) and I2C digital interfaces ► Small and thin 2.2 mm × 2.3 mm × 0.87 mm package
APPLICATIONS
► 24/7 sensing ► Hearing aids ► Vital signs monitoring devices ► Motion-enabled power save switches ► Motion-enabled metering devices ► Smart watch with single-cell operation ► Smart home
Figure 1.
GENERAL DESCRIPTION The ADXL367 is an ultralow power, 3-axis microelectromechanical systems (MEMS) accelerometer that consumes only 0.89 µA at a 100 Hz output data rate and 180 nA w...
Similar Datasheet