Document
Photocoupler Product Data Sheet
MOC3052 SERIES
Spec No.: DS70-2001-025 Effective Date: 06/17/2016 Revision: E
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto
Photocoupler MOC305X series
1. DESCRIPTION
1.1 Features
Isolation voltage between input and output Viso : 5,000Vrms 6pin DIP photocoupler, triac driver output High repetitive peak off-state voltage VDRM : Min. 600V High critical rate of rise of off-state voltage( dV/dt : MIN. 1000V / s ) Dual-in-line package : MOC3050, MOC3051, MOC3052, MOC3053 Wide lead spacing package : MOC3050M, MOC3051M, MOC3052M, MOC3053M Surface mounting package : MOC3050S, MOC3051S, MOC3052S, MOC3053S Tape and reel packaging : MOC3050S-TA, MOC3051S-TA, MOC3052S-TA, MOC3053S-TA
MOC3050S-TA1, MOC3051S-TA1, MOC3052S-TA1, MOC3053S-TA1 Safety approval
UL 1577, Cert. No.E113898 CSA CA5A, Cert. No. 1020087 (CA 91533-1) FIMKO EN/IEC 60950-1, EN/IEC 60065; Cert. No.NCS/FI 24426 M3 VDE DIN EN60747-5-2, Cert. No. 40015248 CQC GB4943.1-2011/ GB8898-2011 RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC). MSL class1
1.2 Applications
AC Motor Drives AC Motor Starters E.M. Contactors Lighting Controls Solenoid/Valve Controls Solid State Relays Static Power Switches Temperature Controls
1/11
Part No. : MOC305X Series BNS-OD-FC002/A4 Rev. : -
2. PACKAGE DIMENSIONS
2.1 MOC305X
Photocoupler MOC305X series
2.2 MOC305XM
2.3 MOC305XS
Notes :
1. Year date code. 2. 2-digit work week. 3. Factory identification mark shall be marked
(W: China-CZ, Y: Thailand) 4. VDE option 5. IFT rank
* Dimensions are in Millimeters and (Inches).
2/11
Part No. : MOC305X Series BNS-OD-FC002/A4 Rev. : -
3. TAPING DIMENSIONS
3.1 MOC305XS-TA
Photocoupler MOC305X series
3.2 MOC305XS-TA1
Description Tape wide
Pitch of sprocket holes
Distance of compartment
Distance of compartment to compartment
Symbol W P0 F P2
P1
Dimension in mm (inch) 16±0.3 (0.63) 4±0.1 (0.15) 7.5±0.1 (0.295) 2±0.1 (0.079)
12±0.1 (0.472)
3.3 Quantities Per Reel
Package Type Quantities (pcs)
MOC305XS series 1000
3/11
Part No. : MOC305X Series BNS-OD-FC002/A4 Rev. : -
4. RATING AND CHARACTERISTICS
4.1 Absolute Maximum Ratings at Ta=25°C
Parameter
Forward Current
Input
Reverse Voltage Junction Temperature Power Dissipation
Output
Off-State Output Terminal Voltage Peak Repetitive Surge Current ( PW=1ms, 120pps ) Junction Temperature Collector Power Dissipation
Total Power Dissipation
1.
Isolation Voltage
Operating Temperature
Storage Temperature
2.
Soldering Temperature
Photocoupler MOC305X series
Symbol
IF VR TJ P VDRM
ITSM
TJ PC Ptot Viso Topr Tstg Tsol
Rating
50 6 125 100 600
1
125 300 330 5000 -40 ~ +100 -55 ~ +150 260
Unit
mA V oC mW V
A
oC mW mW Vrms oC oC oC
1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave.
2. For 10 Seconds
4/11
Part No. : MOC305X Series BNS-OD-FC002/A4 Rev. : -
4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25°C
Photocoupler MOC305X series
Input Output Couple
Parameter
Symbol Min. Typ. Max. Unit Test Condition
Forward Voltage
VF
—
1.15 1.5
V IF=20mA
Reverse Current
Peak Blocking Current, Either 1
Direction
Peak On-State Voltage, Either Direction
Critical rate of Rise of 2
Off-State Voltage
Led Trigger
MOC3050
Current, Current MOC3051
3 Required to
MOC3052
Latch Output,
MOC3053
Either Direction
Holding Current, Either
Direction
IR IDRM VTM dv/dt IFT
IH
—
0.05
—
10
—
1.7
1000
—
—
—
—
—
—
—
—
—
—
200
10
A VR=6V
100
nA VDRM = 600V
3.0
V ITM=100 mA Peak
— V/s Vin=240Vrms
30
15
Main Terminal
mA
10
Voltage = 3V
5
—
A
*1. Test voltage must be applied within dv/dt rating. *2. This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only. *3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT, 30 mA for MOC3050, 15 mA for MOC3051, 10 mA for MOC3052, 5 mA for MOC3053, and absolute max IF (50mA)
5/11
Part No. : MOC305X Series BNS-OD-FC002/A4 Rev. : -
Photocoupler MOC305X series
5. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE)
Forward current I F (m A)
Fig.1 Forw ard C urrent vs. Am bient Tem perature
60
50
40
30
20
10
0 -40 -20 0 20 40 60 80 100 120
o
Am b ient tem p erature Ta ( C)
ITM , o n-state c urrent (A)
Fig.2 O n-state C urrent vs. Am bient Tem perature
0.10
0.05
0 -40 -20 0 20 40 60.