14.2-Gbps Quad 1:2-2:1 Mux Linear-Redriver
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
SN65LVCP114
SLLSEA8A – JANUARY...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
SN65LVCP114
SLLSEA8A – JANUARY 2012 – REVISED MARCH 2016
SN65LVCP114 14.2-Gbps Quad 1:2-2:1 Mux, Linear-Redriver With Signal Conditioning
1 Features
1 Quad 2:1 Mux and 1:2 Demux Multi-Rate Operation up to 14.2 Gbps Serial Data
Rate Linear Receiver Equalization Which Increases
Margin at System Level of Decision Feedback Equalizer Bandwidth: 18 GHz, Typical Per-Lane P/N Pair Inversion Port or Single Lane Switching Low Power: 150 mW/Channel, Typical Loopback Mode on All Three Ports I2C Control in Addition to GPIO DIAG Mode That Outputs Data of Line Side Port to Both Fabric Side Ports 2.5-V or 3.3-V Single Power Supply PBGA Package 12-mm × 12-mm × 1-mm, 0.8-mm Terminal Pitch Excellent Impedance Matching to 100-Ω PCB Transmission Lines Small Package Size Provides Board Real Estate Saving Adjustable Output Swing Provides Flexible EMI and Crosstalk Control Low Power Supports 10GBASE-KR Applications With Ability to Transparency for Link Training
2 Applications
High-Speed Redundancy Switch in Telecom and Data Communication
Backplane Interconnect for 10G-KR, 16GFC
3 Description
The SN65LVCP114 device is an asynchronous, protocol-agnostic, low-latency QUAD mux, linearredriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications. The architecture of SN65LVCP114 li...
Similar Datasheet