SN65LVCP408

SN65LVCP408 www.ti.com SLLS842A – JUNE 2009 – REVISED JUNE 2010 Gigabit 8 x 8 CROSSPOINT SWITCH Check for Samples: SN65LVCP408 FEATURES 1 23 Up to 4.25 Gbps Operation Non-Blocking Architecture Allows Each Output to be Connected to Any Input 30 ps of Deterministic Jitter Selectable Transmit Pre-Emphasis Per Lane Selectable Receive Equalization Available Packaging 64 Pin QFP Propagation Delay Times: 500 ps Typical Inputs Electrically Compatible With CML Signal Levels Operates From a Single 3.3-V Supply Ability to 3-STATE Outputs Integrated Termination Resistors I2C™ Control Interface DESCRIPTION The SN65LVCP408 is a 8 × 8 non-blocking crosspoint switch in a flow-through pin-out allowing for ease in PCB layout. VML signaling is used to achieve a high-speed data throughput while using low power. Each of the output drivers includes a 8:1 multiplexer to allow any input to be routed to any output. Internal signal paths are fully differential to achieve the high signaling speeds while maintaining low signal skews. The SN65LVCP408 incorporates 100-Ω termination resistors for those applications where board space is a premium. Built-in transmit pre-emphasis and receive equalization for superior signal integrity performance. The SN65LVCP408 is characterized for operation from –40°C to 85°C. (See operating free air condition requirements) VCC I2C_EN SWT GND 0Y 0Z VCC 1Y 1Z GND 2Y 2Z VCC 3Y 3Z GND APPLICATIONS Clock Buffering/Clock MUXing Wireless Base Stat...