SN65LVDS180-Q1

www.ti.com SN65LVDS180-Q1 SN65LVDS050-Q1 SN65LVDS051-Q1 SGLS204C – SEPTEMBER 2003 – REVISED MARCH 2013 HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS Check for Samples: SN65LVDS180-Q1, SN65LVDS050-Q1, SN65LVDS051-Q1 FEATURES 1 Qualified for Automotive Applications ESD Protection Exceeds 2000 V Per MIL-STD- 883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Meets or Exceeds the Requirements of ANSI TIA/EIA-644-1995 Standard Signaling Rates up to 400 Mbps Bus-Terminal ESD Exceeds 12 kV Operates From a Single 3.3-V Supply Low-Voltage Differential Signaling With Typical Output Voltages of 350 mV and a 100-Ω Load Propagation Delay Times – Driver: 1.7 ns Typ – Receiver: 3.7 ns Typ Power Dissipation at 200 MHz – Driver: 25 mW Typical – Receiver: 60 mW Typical LVTTL Input Levels Are 5-V Tolerant Receiver Maintains High Input Impedance With VCC < 1.5 V Receiver Has Open-Circuit Fail Safe DESCRIPTION The SN65LVDS180, SN65LVDS050, and SN65LVDS051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400 Mbps. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 50-mV signals with up to 1 V of ground potential difference between a transmitter and receiver. The intended application of this device and signaling technique is for point-to-point baseband data tra...