UMFT600X-B

UMFT60x FIFO TO USB 3.0 Bridge Evaluation Board Version 1.1 Document Reference No.:FT_001191 Clearance No.: FTDI#457 Future Technology Devices International Ltd UMFT60x (FIFO TO USB 3.0 Bridge Evaluation Board) The UMFT60xx is an evaluation/development module with either FMC(LPC)/HSMC connectors for interfacing FTDI’s FT60x USB 3.0 Superspeed IC with external hardware. The UMFT60xx allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT60x. As a daughter card, the UMFT60xx must work with a FIFO master board which has either a FMC or HSMC connector. There are 4 models which provide different FIFO bus interfaces and data bit widths. The modules are designed such that they can plug into most FPGA development platforms supplied by vendors such as Xilinx or Altera. Refer to Ordering Information for module options. The UMFT60xx supports 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data “burst” rate of up to 400MB/s. For a full list of the FT60x’s features refer to the FT60x datasheet. The UMFT60xx module has the following features:  Supports USB 3.0 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps)/USB 2.0 Full Speed (12Mbps) transfer  4 IN channels and 4 OUT channels on FIFO bus connectivity  Supports multi voltage I/O: 1.8V, 2.5V and 3.3V  High speed connector for FIFO bus : FMC(Field Programmable Mezzanine Card) or HSMC (High Speed Mezzanine Card)  FMC connector is compatible with most Xilinx FPG...