1-Bit Unidirectional Voltage-Level Translator
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
SN74AUP1T34
SCES841F – JUNE 2012 ...
Description
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
SN74AUP1T34
SCES841F – JUNE 2012 – REVISED APRIL 2018
SN74AUP1T34 1-Bit Unidirectional Voltage-Level Translator
1 Features
1 Wide Operating VCC Range of 0.9 V to 3.6 V Balanced Propagation Delays: tPLH = tPHL (1.8-V to
3.3-V Translation Typical) Low Static-Power Consumption: Maximum of 5-µA
ICC ±6-mA Output Drive at 3 V Ioff Supports Partial Power-Down-Mode Operation VCC Isolation Feature – If VCCA Input Is at GND,
B Port Is in the High-Impedance state Input Hysteresis Allows Slow Input Transition and
Better Switching Noise Immunity at Input ESD Protection Exceeds JESD 22 5000-V Human-Body Model (A114-A) Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
2 Applications
Enterprise Industrial Personal Electronics Telecommunications
3 Description
The SN74AUP1T34 device is a 1-bit noninverting translator that uses two separate configurable powersupply rails. It is a uni-directional translator from A to B. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts supply voltages from 0.9 V to 3.6 V. This allows for low-voltage translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. The SN74AUP1T34 is also fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the de...
Similar Datasheet