DatasheetsPDF.com

TSOP12436 Dataheets PDF



Part Number TSOP12436
Manufacturers Vishay
Logo Vishay
Description IR Receiver
Datasheet TSOP12436 DatasheetTSOP12436 Datasheet (PDF)

Datasheet Values Refer to PCN-OPT-1224-2022 TSOP122.., TSOP124.., TSOP126.., TSOP142.., TSOP144.., TSOP146.. www.vishay.com Vishay Semiconductors IR Receiver Modules for Remote Control Systems DESCRIPTION This IR receiver series is optimized for long burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower th.

  TSOP12436   TSOP12436


Document
Datasheet Values Refer to PCN-OPT-1224-2022 TSOP122.., TSOP124.., TSOP126.., TSOP142.., TSOP144.., TSOP146.. www.vishay.com Vishay Semiconductors IR Receiver Modules for Remote Control Systems DESCRIPTION This IR receiver series is optimized for long burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code compatibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These 23196 components have not been qualified to automotive specifications. LINKS TO ADDITIONAL RESOURCES Product Page Marking Packages Holders Bends and Cuts FEATURES • Individual IC settings to reach maximum performance • Immunity against noise (lamps, LCD TV, Wi-Fi) • Low supply current • Photo detector and preamplifier in one package • Supply voltage: 2.0 V to 5.5 V • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Infrared remote control systems DESIGN SUPPORT TOOLS • 3D models • Window size calculator BLOCK DIAGRAM 30 kΩ Input AGC Band pass Demodulator PIN 16833-22 Control circuit VS OUT GND Rev. 2.0, 16-Aug-2022 1 Document Number: 82803 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Datasheet Values Refer to PCN-OPT-1224-2022 TSOP122.., TSOP124.., TSOP126.., TSOP142.., TSOP144.., TSOP146.. www.vishay.com Vishay Semiconductors MECHANICAL DATA Pinning for TSOP14...: 1 = OUT, 2 = GND, 3 = VS Pinning for TSOP12...: 1 = OUT, 2 = VS, 3 = GND ORDERING CODE TSOP12..., TSOP14... - 2160 pieces in tubes APPLICATION CIRCUIT 17170-14 Transmitter IR receiver with TSALxxxx VS Circuit OUT GND R1 C1 VO + VS μC GND 1 2 3 23198 R1 and C1 recommended in case there are strong ripple or spikes on the supply line. PARTS TABLE AGC BASIC NOISE SUPPRESSION (AGC2) ENHANCED NOISE SUPPRESSION (AGC4) MAXIMIZED NOISE SUPPRESSION (AGC6) 30 kHz TSOP14230 TSOP12230 TSOP14430 TSOP12430 TSOP14630 TSOP12630 33 kHz TSOP14233 TSOP12233 TSOP14433 TSOP12433 TSOP14633 TSOP12633 Carrier 36 kHz TSOP14236 frequency 38 kHz TSOP14238 TSOP12236 TSOP12238 TSOP14436 (4)(6) TSOP12436 (4)(6) TSOP14636 (5) TSOP12636 (5) TSOP14438 (2)(3)(9)(10) TSOP12438 (2)(3)(9)(10) TSOP14638 TSOP12638 40 kHz TSOP14240 (11) TSOP12240 (11) TSOP14440 TSOP12440 TSOP14640 TSOP12640 56 kHz TSOP14256 (1) TSOP12256 (1) TSOP14456 (8) TSOP12456 (8) TSOP14656 (7) TSOP12656 (7) Package Mold Pinning Dimensions (mm) 1 = OUT, 1 = OUT, 2 = GND, 3 = VS 2 = VS, 3 = GND 1 = OUT, 2 = GND, 3 = VS 1 = OUT, 2 = VS, 3 = GND 6.0 W x 6.95 H x 5.6 D 1 = OUT, 1 = OUT, 2 = GND, 3 = VS 2 = VS, 3 = GND Mounting Leaded Application Remote control Best choice for (1) Cisco (2) Mitsubishi (3) NEC (4) Panasonic (5) RC-5 (6) RC-6 (7) RCA (8) r-step (9) Sejin 4PPM (10) Sharp (11) Sony Special options • Narrow optical filter: www.vishay.com/doc?81590 • Wide optical filter: www.vishay.com/doc?82726 ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply voltage Supply current Output voltage Output current Junction temperature Storage temperature range Operating temperature range Power consumption Soldering temperature Tamb ≤ 85 °C t ≤ 10 s, 1 mm from case VS -0.3 to +6 V IS 3 mA VO -0.3 to (VS + 0.3) V IO 5 mA Tj 100 °C Tstg -25 to +85 °C Tamb -25 to +85 °C Ptot 10 mW Tsd 260 °C Note • Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability Rev. 2.0, 16-Aug-2022 2 Document Number: 82803 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Datasheet Values Refer to PCN-OPT-1224-2022 TSOP122.., TSOP124.., TSOP126.., TSOP142.., TSOP144.., TSOP146.. www.vishay.com Vishay Semiconductors ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Supply current Supply voltage Transmission distance Output voltage low Ev = 0, VS = 3.3 V Ev = 40 klx, sunlight Ev = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 50 mA IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1 ISD ISH VS d VOSL.


TSOP14436 TSOP12436 TSOP14636


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)