TUSB216-Q1

TUSB216-Q1 SLLSF03A – APRIL 2019 – REVISED SEPTEMBER 2021 TUSB216-Q1 USB 2.0 High-Speed Signal Conditioner With BC 1.2 Controller 1 Features AEC-Q100 qualified for automotive applications – Device temperature grade 2: –40°C to 105°C TA Wide supply voltage range: 2.3 - 6.5 V Ultra-low USB disconnect and shutdown power consumption Provides USB 2.0 high-speed signal conditioning Compatible with USB 2.0, OTG 2.0 and BC 1.2 Support for low-speed, full-speed, high-speed signaling Integrated BC 1.2 CDP battery charging controller Host/Device agnostic Supports up to 5-m cable length – Four selectable signal boost (edge boost along with DC boost) settings via external pull-down resistor values – Three selectable RX sensitivity settings via pullup-or-down to compensate ISI jitter for highloss applications Supports up to 10-m cable length with two TUSB216-Q1 devices Scalable solution - devices can be daisy chained for high loss applications Pin compatible with TUSB211, TUSB212, TUSB214 (3.3 V) 2 Applications Automotive infotainment and cluster Automotive head unit Active cable, cable extenders, backplane 3 Description The TUSB216-Q1 is a third-generation USB 2.0 highspeed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel. The TUSB216-Q1 leverages a patented design to speed-up transition edges of USB 2.0 high-speed signal with an edge booster and increases stati...