USB 2.0 High-Speed Signal Conditioner
www.ti.com
TUSB216 SLLSEZ6C – FEBRUARY 2019 – REVISED OCTTOUBSERB2201260
SLLSEZ6C – FEBRUARY 2019 – REVISED OCTOBER 202...
Description
www.ti.com
TUSB216 SLLSEZ6C – FEBRUARY 2019 – REVISED OCTTOUBSERB2201260
SLLSEZ6C – FEBRUARY 2019 – REVISED OCTOBER 2020
TUSB216 USB 2.0 High-Speed Signal Conditioner With BC 1.2 Controller
1 Features
Wide supply voltage range: 2.3 - 6.5 V Ultra-low USB disconnect and shutdown power
consumption Provides USB 2.0 high-speed signal conditioning Compatible with USB 2.0, OTG 2.0 and BC 1.2 Support for low-speed, full-speed, high-speed
signaling Integrated BC 1.2 CDP battery charging controller Host/Device agnostic Supports up to 5-m cable length
– Four selectable signal boost (edge boost along with DC boost) settings via external pull-down resistor values
– Three selectable RX sensitivity settings via pullup-or-down to compensate ISI jitter for highloss applications
Supports up to 10-m cable length with two TUSB216 devices
Scalable solution - devices can be daisy chained for high loss applications
Pin compatible with TUSB211/212/214 (3.3V)
2 Applications
Laptop, desktop/docking stations Portable electronics Tablets Cell phones Televisions Active cable, cable extenders
Backplane
3 Description
The TUSB216 is a third-generation USB 2.0 highspeed signal conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel.
The TUSB216 leverages a patented design to speedup transition edges of USB 2.0 high-speed signal with an edge booster and increases static levels with a DC boo...
Similar Datasheet