4-Channel Low Capacitance Dual-Voltage ESD Protection Array
CM1641
4-Channel Low Capacitance Dual-Voltage ESD Protection Array
Features
• Three Channels of Low Voltage ESD Protecti...
Description
CM1641
4-Channel Low Capacitance Dual-Voltage ESD Protection Array
Features
Three Channels of Low Voltage ESD Protection One Channel of High Voltage ESD Protection Provides ESD Protection to IEC61000−4−2 Level 4:
♦ ±8 kV Contact Discharge (Pins 1−3) ♦ ±15 kV Contact Discharge (Pin 4)
Low Channel Input Capacitance Minimal Capacitance Change with Temperature and Voltage High Voltage Zener Diode Protects Supply Rail No Need for External Bypass Capacitors Each I/O Pin can Withstand over 1000 ESD Strikes* These Devices are Pb−Free and are RoHS Compliant
TYPICAL APPLICATION
VCC
http://onsemi.com
UDFN8 D4 SUFFIX CASE 517BC
ELECTRICAL SCHEMATIC
VP (Internal)
VCC Pin 4
CH1 Pin 1
CH2 Pin 2
LV
HV
CH3 Pin 3
High−Speed Data Lines
CH1 (1) CH2 (2) CH3 (3) VCC (4)
* Die Attach Pad on Back of Package (Connect to Ground)
Note: All grounds must be connected.
DAP*
VN (8) VN (7) VN (6) GND (5)
Pins 6 − 8 VN
Pin 5 GND
Note: Pins 5 and 6 to 8 are connected to a common substrate.
MARKING DIAGRAM
P41 MG
1
G
P41 = CM1641−04D4
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device CM1641−04D4
Package
UDFN−8 0.4 mm (Pb−Free)
Shipping† 3000/Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
*Standard test condition is IEC61000−4−2 level 4 test circuit with each pin subjecte...
Similar Datasheet