Low-Power OOK/FSK/ASK ISM Band Transceiver
NCV53480
Low-Power OOK/FSK/ASK ISM Band Transceiver
General Description
The NCV53480 ASSP is a low power OOK/FSK/ASK ...
Description
NCV53480
Low-Power OOK/FSK/ASK ISM Band Transceiver
General Description
The NCV53480 ASSP is a low power OOK/FSK/ASK transceiver
designed for operation in the ISM band from 260 MHz to 470 MHz. It
http://onsemi.com
is intended for use in narrowband, low data rate applications in the
range of 1 kbps to 60 kbps. The receiver architecture is low−IF, and
MARKING
contains image reject filtering to provide 40 dB of image reject. The IF
DIAGRAM
filter is fully integrated on chip with selectable bandwidth settings of 100 kHz, 200 kHz, and 300 kHz. The transmitter output power is programmable from −20 to 10 dBm.
On−chip digital circuitry can be configured to have the part perform periodic channel polling on up to 3 channels, with full control of the
1 32
NQFP 32, 6x6 CASE 560AR
1
NCV53480−C AWLYYWWG
CCCCC
polling interval and active receive time for each channel. Additional
register control can be used to have the part wake based on a pattern, energy level, or detected ID.
NCV53480−C = Specific Device Code
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
Features
Single Supply Operation from 2.2 V to 3.63 V Temperature Range: −40°C to +125°C
G
= Pb−Free Package
CCCCC = Country of Origin*
(*Not required if assembled in USA)
Simultaneous OOK/FSK (De)modulation
No External Switch Needed Between LNA Input and PA Output
ORDERING INFORMATION
Low Current Consumption Mode ( < 1 mA) Programmable Frequency Band from 280 MHz to 434 MHz with
...
Similar Datasheet