STTN6050H-12M1Y

STTN6050H-12M1Y Datasheet 60 A 1200 V thyristor controlled bridge leg in ACEPACK SMIT module Features Product status STTN6050H-12M1Y Product summary IT(RMS) 60 A IOUT(AV) 75 A IIN_AC(RMS) 85 A VDRM/VRRM 1200 V VDSM/VRSM 1400 V IGT 50 mA Tj -40 to +150 °C AEC-Q101 qualified 1200 V symmetrical blocking voltage High junction temperature: 150 °C High noise immunity, static dV/dt: 1000 V/μs Embed two TN6050HP-12 dies in series Module qualified according to AQG324 recommendation SMD with isolated top cooled tab 4000 V insulated tab-to-lead package – UL recognized, File E81734 Terminal pins opposite to cooling side – Fully automatic PCB mounting to heat sink Large creepage distance to meet IEC 60664-1 – 250 VAC, material group 2, pollution degree 3 – 600 VAC, material group 2, pollution degree 2 ECOPACK2 compliant component Applications Single and tri-phase controlled rectifier bridge AC phasing half bridge of a totem pole PFC On-board and stationary chargers AC / DC converter for motor drive, UPS and SMPS Output full wave DC current up to 75 AAV AC Input converter current up to 85 ARMS Solid-state relay in heating control, by pass switch and motor starter Description The STTN6050H-12M1Y achieves a 1200 V 60 A full controlled SCR bridge leg in ACEPACK SMIT module, and it can control an AC current up to 85 ARMS when connected to an AC line network. Thus, it allows to design a single or three-phase AC / DC rectifier bridge, a phase...