Fully integrated controller
ST-ONE
Datasheet
Fully integrated controller for smart chargers
Features
• ZVS non-complementary active clamp flyback c...
Description
ST-ONE
Datasheet
Fully integrated controller for smart chargers
Features
ZVS non-complementary active clamp flyback controller with synchronous rectification and USB-PD 3.1 PPS interface
ARM® 32-bit Cortex®-M0+ MCU with 64 kB flash memory for digital power control and USB protocol
– FW programmable secondary side MCU controls both synchronous rectifier and ZVS active clamp flyback on the primary side to improve system efficiency in every condition
– High switching frequency operations in companion with MasterGaN power stage allow to use small size magnetic components, including planar transformers
Reinforced galvanically isolated dual communication channel compliant with IEC 62368-1:
– 4 kV pk transient voltage
– 9.6 kV pk 1min hipot type testing
– 6.4 kV pk 1s hipot production testing
800 V high voltage startup with integrated input voltage sensing and Brownin/out functions
Active input filter capacitor discharge circuitry for reduced standby power compliant with IEC 62368-1
Fully Integrated USB-PD PHY with 24 V tolerant protection, and integrated load switch driver
Product status link ST-ONE
Product label
Application
USB-PD chargers and adapters up to 100 W for smartphones, tablets, laptops and other handheld equipment
Figure 1. Typical system block diagram
VINAC
VBUS
ST-ONE
TYPE-C USB
Description
The ST-ONE is the world’s first digital controller embedding ARM Cortex M0+ core, an offline programmable controller with synchronous rectification, and USB...
Similar Datasheet