MLPF-WB-01E3

MLPF-WB-01E3 Datasheet 2.4 GHz low pass filter matched to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx Top view (pads down) OUT GND3 GND4 GND2 IN GND1 Product status link MLPF-WB-01E3 Features Integrated impedance matching to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx LGA footprint compatible 50 Ω nominal impedance on antenna side Deep rejection harmonics filter Low insertion loss Small footprint Low thickness ≤ 450 μm High RF performance RF BOMBER and area reduction ECOPACK2 compliant Applications Bluetooth 5 OpenThread Zigbee® IEEE 802.15.4 Optimized for STM32WB55Cx/Rx, STM32WB5, STM32WB50Cx, Description The MLPF-WB-01E3 integrates an impedance matching network and harmonics filter. The matching impedance network has been tailored to maximize the RF performance of STM32WB. This device uses STMicroelectronics IPD technology on non-conductive cup of glass substrate which optimizes RF performance. DS13532 - Rev 2 - November 2022 For further information contact your local STMicroelectronics sales office. www.st.com MLPF-WB-01E3 Characteristics 1 Characteristics Symbol PIN VESD TOP Table 1. Absolute ratings (Tamb = 25 °C) Parameter Input power RFIN ESD ratings human body model (JESD22-A114-C), all I/O one at a time while others connected to GND ESD ratings machine model, all I/O Maximum operating temperature Value 10 2000 200 -40 to +105 Unit dBm V °C Table 2. Impedances(Tamb = 25 °C) Symbol Parameter ...