4-channel high-side driver
VN9D5D20F
Datasheet
4 channel high-side driver with 24-bit SPI interface for automotive applications
QFN 6x6
Product s...
Description
VN9D5D20F
Datasheet
4 channel high-side driver with 24-bit SPI interface for automotive applications
QFN 6x6
Product status link VN9D5D20F
Product summary
Order code
VN9D5D20FTR
Package
QFN 6X6
Packing
Tape and reel
Features
Channel 0, 1 2, 3
VCC 28 V
RON typ. 6.7 mΩ 20 mΩ
ILIMH typ. 72 A 34.5 A
AEC-Q100 qualified General
– Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
– 24-bit ST-SPI for full diagnostic and digital current sense feedback – Integrated 10-bit ADC for digital current sense – Integrated PWM engine with independent phase shift and frequency
generation (for each channel) – Programmable Bulb/LED mode for all channels – Advanced limp-home functions for robust fail-safe system – Very low standby current – Optimized electromagnetic emissions – Very low electromagnetic susceptibility – Control through direct inputs and/or SPI – Compliant with European directive 2002/95/EC Diagnostic functions – Digital proportional load current sense – Synchronous diagnostic of over load and short to GND, output shorted
to VCC and OFF-state open-load – Programmable case overtemperature warning Protection – Load current limitation – Self limiting of fast thermal transients – Undervoltage shutdown – Overvoltage clamp – Latch-off or programmable time limited auto restart (power limitation and
overtemperature shutdown) – Load dump protected – Protection against loss of ground – Reverse battery through self turn...
Similar Datasheet