Automotive Multicell battery monitor
L9963E
Datasheet
Automotive Multicell battery monitoring and balancing IC
Features
TQFP 10x10 64L exposed pad down
Pr...
Description
L9963E
Datasheet
Automotive Multicell battery monitoring and balancing IC
Features
TQFP 10x10 64L exposed pad down
Product status link L9963E
Product summary
Order code Package
Packing
L9963E L9963E-TR
TQFP64EP
Tray
Tape and Reel
Product label
AEC-Q100 qualified Measures 4 to 14 cells in series, with 0 μs desynchronization delay between
samples. Supports also busbar connection without altering cell results Coulomb counter supporting pack overcurrent detection in both ignition on and
off states. Fully synchronized current and voltage samples 16-bit voltage ADC with maximum error of ±2 mV in the [0.5 – 4.3] V range, after
soldering, in [-40; +105] °C Tj range 2.66 Mbps isolated serial communication with regenerative buffer, supporting
dual access ring. Less than 4 us latency between start of conversion of the 1st and the 31st device in a chain. Less than 4 ms to convert and read 96 cells in a system using 8 L9963E and L9963T transceiver. Less than 8 ms to convert and read 210 cells in a system using 15 L9963E and L9963T transceiver. Less than 16 ms to convert and read 434 cells in a system using 31 L9963E and L9963T transceiver. Supports both XFMR and CAP based isolation 200 mA passive internal balancing current for each cell in both normal and silent-balancing mode. Possibility of executing cyclic wake up measurements. Manual/Timed balancing, on multiple channels simultaneously; Internal/External balancing Fully redundant cell measurement path, with AD...
Similar Datasheet