VND9012AJ

VND9012AJ Datasheet Double channel high-side driver with current sense analog feedback for automotive applications Features Max transient supply voltage Operating voltage range Typ. on-state resistance (per Ch) Current limitation (typ) Standby current (max) VCC VCC RON ILIMH ISTBY 36 V 4 to 28 V 12 mΩ 63 A 0.5 µA PowerSSO-16 Product status link VND9012AJ Product summary Order code VND9012AJTR Package PowerSSO-16 Packing Tape and reel AEC-Q100 qualified Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013) General – Double channel smart high-side driver with current sense analog feedback – Very low standby current – Compatible with 3 V and 5 V CMOS outputs Current sense diagnostic functions – Multiplexed analog feedback of load current with high precision proportional current mirror – Overload and short to ground (power limitation) indication – Thermal shutdown indication – OFF-state open-load detection – Output short to VCC detection – Sense enable/disable Protections – Undervoltage shutdown – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin – Loss of ground and loss of VCC – Reverse battery through self turn-on – Electrostatic discharge protection Applications Automotive resistive, inductive and capacitive loads Protected supply for ADAS systems: radars and sensors DS...