DatasheetsPDF.com

BlueNRG-LPS Dataheets PDF



Part Number BlueNRG-LPS
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description Low Energy wireless SoC
Datasheet BlueNRG-LPS DatasheetBlueNRG-LPS Datasheet (PDF)

BlueNRG-LPS Datasheet Programmable Bluetooth® Low Energy wireless SoC VFQFPN32 (5 x 5 mm) WLCSP36 (2.652 x 2.592 mm) Product status link BlueNRG-LPS Product summary Order code BlueNRG-332xy Features • Bluetooth® Low Energy system-on-chip supporting Bluetooth 5.3 specifications – 2 Mbps data rate – Long range (Coded PHY) – Advertising extensions – Channel selection algorithm #2 – GATT caching – Direction finding (AoA/AoD) – LE ping procedure – Periodic advertising and periodic advertising .

  BlueNRG-LPS   BlueNRG-LPS


Document
BlueNRG-LPS Datasheet Programmable Bluetooth® Low Energy wireless SoC VFQFPN32 (5 x 5 mm) WLCSP36 (2.652 x 2.592 mm) Product status link BlueNRG-LPS Product summary Order code BlueNRG-332xy Features • Bluetooth® Low Energy system-on-chip supporting Bluetooth 5.3 specifications – 2 Mbps data rate – Long range (Coded PHY) – Advertising extensions – Channel selection algorithm #2 – GATT caching – Direction finding (AoA/AoD) – LE ping procedure – Periodic advertising and periodic advertising sync transfer – LE L2CAP connection-oriented channel – LE power control and path loss monitoring • Radio – RX sensitivity level: -97 dBm @ 1 Mbps, -104 dBm @ 125 kbps (long range) – Programmable output power up to +8 dBm (at antenna connector) – Data rate supported: 2 Mbps, 1 Mbps, 500 kbps and 125 kbps – 128 physical connections – Integrated balun – Support for external PA and LNA – BlueNRG core coprocessor (DMA based) for Bluetooth Low Energy timing critical operation – 2.4 GHz proprietary radio driver – Suitable for systems requiring compliance with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 part 15, ARIB STD-T66 – Available integrated passive device (IPD) companion chip for optimized matching and filtering • Ultra-low power radio performance – 8 nA in SHUTDOWN mode (1.8 V) – 0.8 µA in DEEPSTOP mode (with external LSE and BLE wake-up sources, 1.8 V) – 1.0 µA in DEEPSTOP mode (with internal LSI and BLE wake-up sources, 1.8 V) – 4.3 mA peak current in TX (@ 0 dBm, 3.3 V) – 3.4 mA peak current in RX (@ sensitivity level, 3.3V) • High performance and ultra-low power Arm® Cortex®-M0+ 32-bit, running up to 64 MHz • Dynamic current consumption: 14 µA/MHz • Operating supply voltage: from 1.7 to 3.6 V • -40 ºC to 105 ºC temperature range • Supply and reset management – High efficiency embedded SMPS step-down converter with intelligent bypass mode – Ultra-low power power-on-reset (POR) and power-down-reset (PDR) – Programmable voltage detector (PVD) DS13819 - Rev 6 - February 2024 For further information contact your local STMicroelectronics sales office. www.st.com BlueNRG-LPS • Clock sources – 64 MHz PLL – Fail safe 32 MHz crystal oscillator with integrated trimming capacitors – 32 kHz crystal oscillator – Internal low-power 32 kHz RO • On-chip non-volatile flash memory of 192 Kbytes • On-chip RAM of 24 Kbytes + 4 Kbytes PKA RAM • One-time-programmable (OTP) memory area of 1 Kbytes • Embedded UART bootloader • Ultra-low power modes with or without timer and RAM retention • Quadrature decoder • Enhanced security mechanisms such as: – Flash read/write protection – SWD disabling – Secure bootloader • Security features – True random number generator (RNG) – Hardware encryption AES maximum 128-bit security co-processor – HW public key accelerator (PKA) – Cryptographic algorithms: RSA, Diffie-Helman, ECC over GF(p) – CRC calculation unit – 64-bit unique ID • System peripherals – 1x DMA controller with 8 channels supporting ADC, SPI-I2S, I2C, USART, LPUART, TIMERS – 1x SPI with I2S interface multiplexed – 1x I2C (SMBus/PMBus) – 1x LPUART (low power) – 1x USART (ISO 7816 smartcard mode, IrDA, SPI Master and Modbus) – 1x independent WDG – 1x real-time clock (RTC) – 1x independent SysTick – 1x 16-bits, four channel general purpose timer – 2x 16-bits, two channel general purpose timer – Infrared interface • Up to 20 fast I/Os – All of them with wake-up capability – All of them retain state in low-power – All of them 5 V tolerant • Analog peripherals – 12-bit ADC with 8 input channels, up to 16 bits with down sampler – Battery monitoring – Analog watchdog • Development support – Serial wire debug (SWD) – 4 breakpoints and 2 watchpoints • All packages are ECOPACK2 compliant DS13819 - Rev 6 page 2/67 BlueNRG-LPS Applications • Industrial • Home and industrial automation • Asset tracking, ID location, real-time locating system • Smart lighting • Fitness,wellness and sports • Healthcare, consumer medical • Security/proximity • Remote control • Assisted living • Mobile phone peripherals • PC peripherals Description The BlueNRG-LPS is an ultra-low power programmable Bluetooth® Low Energy wireless SoC solution. It embeds STMicroelectronics’s state-of-the-art 2.4 GHz radio IPs, optimized for ultra-low-power consumption and excellent radio performance, for unparalleled battery lifetime. It is compliant with Bluetooth Low Energy SIG core specification version 5.3 addressing point-to-point connectivity and Bluetooth Mesh networking and allows largescale device networks to be established in a reliable way. The BlueNRG-LPS is also suitable for 2.4 GHz proprietary radio wireless communication to address ultra-low latency applications. The BlueNRG-LPS embeds a Arm® Cortex®-M0+ microcontroller that can operat.


BlueNRG-LP BlueNRG-LPS STWBC86


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)