Quad high-side smart power solid-state relay
PowerSO-10
Product status link VN340SP-E & VN340SP-33-E
Product label
VN340SP-E & VN340SP-33-E
Datasheet
Quad high-side...
Description
PowerSO-10
Product status link VN340SP-E & VN340SP-33-E
Product label
VN340SP-E & VN340SP-33-E
Datasheet
Quad high-side smart power solid-state relay
Features
Operating output current: 0.7 A (VN340SP-E) or 1 A (VN340SP-33-E) Digital I/O clamped at 32 V minimum voltage Shorted load and overtemperature protections Protection against loss of ground Built-in current limiter Undervoltage shutdown Open drain diagnostic output Fast demagnetization of inductive loads Conforms to IEC 61131-2
Applications
Vending machines Industrial PC peripheral input/output Numerical control machines General high-side switch applications
Description
VN340SP-E & VN340SP-33-E are monolithic devices developed using STMicroelectronics' VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when the overtemperature condition of the relative channel is verified.
DS4346 - Rev 5 - September 2022 For further information contact your local STMicroelectronics sales office.
www.st.com
1
Block diagram
VN340SP-E & VN340SP-33-E
Block diagram
Figure 1. Block diagram
DS4346 - Rev 5
page 2/20
VN340SP-E & VN340SP-33-E
Pin connection
2
Pin connection
...
Similar Datasheet