Rad-hard plastic Quad two-input AND gate
Maturity status link LEOAC08
LEOAC08
Datasheet
Rad-hard plastic Quad two-input AND gate
Features
• AND gate • 6 V max. ...
Description
Maturity status link LEOAC08
LEOAC08
Datasheet
Rad-hard plastic Quad two-input AND gate
Features
AND gate 6 V max. operating 7 V max. rating 8.5 ns propagation delay Nickel/Palladium/Gold-lead-finished (NiPdAu), whisker-free Gold-wires RML <1% and CVCM <0.1% guaranteed outgassing 50 krad (Si) Total Ionizing Dose SEL-free up to 62.5 MeV.cm²/mg Mass: 80 mg Compliant with ST-LEO-specification
Applications
Low earth orbit (LEO) applications
Description
The LEOAC08 is a CMOS low power quad 2-input AND gate qualified for use in aerospace environments. It operates from 2 V to 6 V power supply (7 V absolute maximum rating). The LEOAC08 can operate over a large temperature range of -40 °C to +125 °C and it is housed in plastic TSSOP-20, Thin-Shrink Small Outline Package, 20 leads, using golden bonding and Nickel/Palladium/Golden-lead-finishing to prevent whiskers. The LEOAC08 is compliant with ST-LEO-specification, dedicated specification for space-ready rad-hard plastic products. This AEC-Q100-based specification offers a specific trade-off between footprint size savings, cost of ownership and quality assurance together with radiation hardness and large quantity capability.
DS13855 - Rev 2 - February 2022 For further information contact your local STMicroelectronics sales office.
www.st.com
1
Functional description
Figure 1. Pin connections (top view)
LEOAC08
Functional description
INPUT (A) L L H H
Table 1. Truth table
Each gate INPUT (B)
L H L H
wi...
Similar Datasheet