55V/250mA THREE-CHANNEL LINEAR LED DRIVER
ADVANCED INFORMATION
AL5873
55V/250mA THREE-CHANNEL LINEAR LED DRIVER
Description
The AL5873 is a three-channel linear...
Description
ADVANCED INFORMATION
AL5873
55V/250mA THREE-CHANNEL LINEAR LED DRIVER
Description
The AL5873 is a three-channel linear LED driver with PWM dimming and analog dimming control. Each channel can drive up to 250mA with a total driving current up to 750mA. The LED channel current of the AL5873 can be set through two reference resistors connected to the REF1 and REF2 pins.
The AL5873 regulates LED current for each channel, accurate down to ±4%, with excellent dimming performance. The AL5873 enters standby mode to save power if no PWM signal is detected.
The AL5873 monitors the temperature and reduces the LED current if the chip temperature exceeds the threshold temperature. Moreover, the input under voltage lock-out (UVLO), LED string open/short protection, over temperature protection (OTP), and fault indicator (FAULTB) are designed to improve system robustness.
Pin Assignments
VIN 1 NC 2 PWM 3 NC 4 NC 5 GND 6 GND 7 GND 8
TSSOP-16EP (Type DX)
EP
Top View
The AL5873 is available in TSSOP-16EP (Type DX) package.
16 FAULTB
15 ADIM
14 REF1
13 FULL
12 REF2
11 LED1
10 LED2
9
LED3
Features
Wide Input Voltage Range from 5V to 55V Each Channel up to 250mA Current Capability Set Stop and Tail Current Independently Through Two Resistors Switch LED Current Between Stop and Tail Function
Automatically via FULL Input PWM Dimming via Both PWM Input and Power Supply Analog Dimming via ADIM Input Automatically Enter and Exit Standby Mode Without Enable Pin Internal P...
Similar Datasheet