2A LOW IQ SYNCHRONOUS BUCK CONVERTER
AP66200
3.8V TO 60V INPUT, 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
Description
The DIODES™ AP66200 is an adjustable switch...
Description
AP66200
3.8V TO 60V INPUT, 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
Description
The DIODES™ AP66200 is an adjustable switching frequency, internally compensated, synchronous DC-DC buck converter with a default internal frequency of 500kHz. The device fully integrates a 185mΩ high-side power MOSFET and an 80mΩ low-side power MOSFET to provide highly efficient step-down DC-DC conversion.
The AP66200 enables a continuous load current of up to 2A with as high as 95% efficiency in enhanced bias. It features current mode control operation, which enables easy loop stabilization while supporting a wide range of output capacitive loads.
With its high level of integration and minimal need for external components, the AP66200 simplifies board layout and reduces space requirements. This makes it ideal for distributed power architectures.
Pin Assignments
16 15 14 BIAS 1
VCC 2
VIN 3
VIN 4
EPAD
5
6
7
GND FB SS/TR PG
13 12 MSYNC 11 FS 10 EN
9 PGND 8
The AP66200 is available in the standard Green U-QFN4040-16/SWP (Type UXB) package.
BST SW SW PGND
Features
VIN 3.8 to 60V 2A Continuous Output Current VOUT Adjustable from 0.8V to 50V Enhanced Efficiency Mode with Bias Adjustable Switching Frequency. 500kHz Default Frequency Start-up with Pre-biased Output External Soft-Start with Tracking – Sequential, Ratiometric, or
Absolute. Default Internal Soft-Start of 2ms Enable Pin with 5% tolerance Soft Discharge ±5% Power Good Detection with Internal Pull-up Resistor O...
Similar Datasheet