Class-D Audio Power Amplifier
LM4673, LM4673SDBD, LM4673TMBD
www.ti.com
SNAS317D – DECEMBER 2005 – REVISED MAY 2013
LM4673
Filterless, 2.65W, Mono...
Description
LM4673, LM4673SDBD, LM4673TMBD
www.ti.com
SNAS317D – DECEMBER 2005 – REVISED MAY 2013
LM4673
Filterless, 2.65W, Mono, Class D Audio Power Amplifier
Check for Samples: LM4673, LM4673SDBD, LM4673TMBD
FEATURES
1
2 Mono Class D Operation No Output Filter Required for Inductive Loads Externally Configurable Gain Very Fast Turn On Time: 17μs (typ) Minimum External Components "Click and Pop" Suppression Circuitry Micro-Power Shutdown Mode Available in Space-Saving 0.4mm Pitch
DSBGA and WSON Packages
APPLICATIONS
Mobile Phones PDAs Portable Electronic Devices
KEY SPECIFICATIONS
Efficiency at 3.6V, 400mW into 8Ω Speaker 88% (typ)
Efficiency at 3.6V, 100mW into 8Ω Speaker 80% (typ)
Efficiency at 5V, 1W into 8Ω Speaker 86% (typ) Quiescent Current, 3.6V Supply 2.1mA (typ) Total Shutdown Power Supply Current
0.01µA (typ) Single Supply Range 2.4V to 5.5V PSRR, f = 217Hz 78dB
DESCRIPTION
The LM4673 is a single supply, high efficiency, 2.65W, mono, Class D audio amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design.
The LM4673 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 5V supply, it is capable of driving a 4Ω speaker load at a continuous average output of 2.1W with less than 1% THD+N. Its flexible power supply requirements allow operation from 2.4V to 5.5V.
The ...
Similar Datasheet