1.25 Watt Fully Differential Audio Power Amplifier
LM4941, LM4941SDBD, LM4941TMBD
www.ti.com
SNAS347C – JUNE 2006 – REVISED MAY 2013
LM4941
1.25 Watt Fully Differentia...
Description
LM4941, LM4941SDBD, LM4941TMBD
www.ti.com
SNAS347C – JUNE 2006 – REVISED MAY 2013
LM4941
1.25 Watt Fully Differential Audio Power Amplifier With RF Suppression and Shutdown
Check for Samples: LM4941, LM4941SDBD, LM4941TMBD
FEATURES
1
2 Improved RF Suppression, By Up to 20dB Over Previous Designs in Selected Applications
Fully Differential Amplification Available in Space-Saving DSBGA Package Ultra Low Current Shutdown Mode Can Drive Capacitive Loads up to 100pF Improved Pop & Click Circuitry Eliminates
Noises During Turn-On and Turn-Off Transitions 2.4 - 5.5V Operation No Output Coupling Capacitors, Snubber Networks or Bootstrap Capacitors Required
APPLICATIONS
Mobile Phones PDAs Portable Electronic Devices
KEY SPECIFICATIONS
Improved PSRR at 217Hz 95dB (typ) Power Output, VDD = 5.0V, RL = 8Ω, 1% THD+N
1.25W (typ) Power Output, VDD = 3.0V, RL = 8Ω, 1% THD+N
430mW (typ) Shutdown Current 0.1µA (typ)
DESCRIPTION
The LM4941 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to a 8Ω load with less than 1% distortion (THD+N) from a 5VDC power supply. The LM4941 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other small form factor applications where minimal PCB space is a primary requirement.
The L...
Similar Datasheet