Output Capacitor-Less Audio Subsystem
LM4946
www.ti.com
SNAS335E – JANUARY 2006 – REVISED AUGUST 2007
LM4946
Output Capacitor-Less Audio Subsystem with Pr...
Description
LM4946
www.ti.com
SNAS335E – JANUARY 2006 – REVISED AUGUST 2007
LM4946
Output Capacitor-Less Audio Subsystem with Programmable TI 3D
Check for Samples: LM4946
FEATURES
1
2 I2C/SPI Control Interface I2C/SPI Programmable TI 3D Audio I2C/SPI Controlled 32 Step Digital Volume
Control (-54dB to +18dB) Three Independent Volume Channels (Left,
Right, Mono) Eight Distinct Output Modes WQFN and DSBGA Surface Mount Packaging “Click and Pop” Suppression Circuitry Thermal Shutdown Protection Low Shutdown Current (0.02uA, typ) RF Immunity Topology
APPLICATIONS
Mobile Phones PDAs
KEY SPECIFICATIONS
THD+N at 1kHz, 540mW into 8Ω BTL (3.3V) 1.0% (typ)
THD+N at 1kHz, 35mW into 32Ω SE (3.3V) 1.0% (typ)
Single Supply Operation (VDD) 2.7 to 5.5V I2C/SPI Single Supply Operation
– WQFN 2.2 to 5.5V – DSBGA 1.7 to 5.5V
DESCRIPTION
The LM4946 is an audio power amplifier capable of delivering 540mW of continuous average power into a mono 8Ω bridged-tied load (BTL) with 1% THD+N, 35mW per channel of continuous average power into stereo 32Ω single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical specifications as the SE configuration, from a 3.3V power supply.
The LM4946 has three input channels: one pair for a two-channel stereo signal and the third for a differential single-channel mono input. The LM4946 features a 32-step digital volume control and eight distinct output modes. The digital volume control, 3D enhancement,...
Similar Datasheet