Voltage-Feedback OPERATIONAL AMPLIFIER
OPA2890
www.ti.com
SBOS364C – DECEMBER 2007 – REVISED DECEMBER 2009
Low-Power, Wideband, Voltage-Feedback OPERATIONAL ...
Description
OPA2890
www.ti.com
SBOS364C – DECEMBER 2007 – REVISED DECEMBER 2009
Low-Power, Wideband, Voltage-Feedback OPERATIONAL AMPLIFIER with Disable
Check for Samples: OPA2890
FEATURES
1
2 FLEXIBLE SUPPLY RANGE: +3V to +12V Single Supply ±1.5V to ±6V Dual Supplies
UNITY-GAIN STABLE WIDEBAND +5V OPERATION: 90MHz
(G = 2V/V) OUTPUT VOLTAGE SWING: ±4.1V HIGH SLEW RATE: 400V/μs LOW QUIESCENT CURRENT: 1.1mA/ch LOW DISABLE CURRENT: 30μA/ch
APPLICATIONS
VIDEO LINE DRIVING xDSL LINE DRIVERS/RECEIVERS HIGH-SPEED IMAGING CHANNELS ADC BUFFERS PORTABLE INSTRUMENTS TRANSIMPEDANCE AMPLIFIERS ACTIVE FILTERS
VI 0V ® 4V
1kW 500pF
50W 200W
+6V
1/2 OPA2890
+5V ADS8472
16W
-6V 200W
750W
750W
0.01mF
16-Bit 1MSPS SAR ADC
VREF/2
375W
+6V
1/2 OPA2890
-6V
16W
500kHz LP Pole
Low Power, DC-Coupled, Single-to-Differential Driver for ≤100kHz Inputs
DESCRIPTION
The OPA2890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional single-supply operation. Using a single +5V supply, the OPA2890 can deliver a 0.9V to 4.1V output swing with over 30mA drive current and 210MHz bandwidth. This combination of features makes the OPA2890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.
The low 1.1mA/ch supply current of the OPA2890 is precisely trimme...
Similar Datasheet