HIGH-EFFICIENCY PWM POWER DRIVER
www.ti.com
Actual Size 9mm Square
DRV593 DRV594
SLOS401C – OCTOBER 2002 – REVISED JULY 2010
±3-A HIGH-EFFICIENCY PWM...
Description
www.ti.com
Actual Size 9mm Square
DRV593 DRV594
SLOS401C – OCTOBER 2002 – REVISED JULY 2010
±3-A HIGH-EFFICIENCY PWM POWER DRIVER
Check for Samples: DRV593, DRV594
FEATURES
1
2 Operation Reduces Output Filter Size and Cost by 50% Compared to DRV591
±3-A Maximum Output Current Low Supply Voltage Operation: 2.8 V to 5.5 V High Efficiency Generates Less Heat Overcurrent and Thermal Protection Fault Indicators for Overcurrent, Thermal and
Undervoltage Conditions Two Selectable Switching Frequencies Internal or External Clock Sync PWM Scheme Optimized for EMI 9×9 mm PowerPAD™ Quad Flatpack Package
APPLICATIONS
Thermoelectric Cooler (TEC) Driver Laser Diode Biasing
DESCRIPTION
The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier.
The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 128°C to allow for system-level shutdown before the amplifier's internal thermal shutdown circuitry activates. The fault indicators also signal when an overcurr...
Similar Datasheet