2-Vrms Line Driver
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV612
SLOS690C – DECEMBER 201...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DRV612
SLOS690C – DECEMBER 2010 – REVISED JULY 2016
DRV612 2-Vrms DirectPath™ Line Driver With Programmable-Fixed Gain
1 Features
1 DirectPath™ – Eliminates Pops and Clicks – Eliminates Output DC-Blocking Capacitors – 3-V to 3.6-V Supply Voltage
Low Noise and THD – SNR > 105 dB at –1× Gain – Vn < 12 μVms, 20 Hz to 20 kHz at –1× Gain (Typical) – THD+N < 0.003% at 10-kΩ Load and –1× Gain
2-Vrms Output Voltage Into 600-Ω Load Single-Ended Input and Output Programmable Gain Select Reduces Component
Count – 13× Gain Values Active Mute With More Than 80-dB Attenuation Short-Circuit and Thermal Protection ±8-kV HBM ESD-Protected Outputs
2 Applications
PDP and LCD TVs DVD Players Mini and Micro Combo Systems Soundcards
Functional Block Diagram
3 Description
The DRV612 is a single-ended, 2-Vrms stereo line driver designed to reduce component count, board space, and cost. It is ideal for single-supply electronics where size and cost are critical design parameters.
The DRV612 does not require a power supply greater than 3.3 V to generate its 5.6-VPP output, nor does it require a split-rail power supply.
The DRV612 device is designed using TI’s patented DirectPath technology, which integrates a charge pump to generate a negative supply rail that provides a clean, pop-free ground-biased output. The DRV612 is capable of driving 2 Vms into a 600-Ω load. DirectPath technology al...
Similar Datasheet