Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
DRV8412, DRV8432
SLES242G – DECEM...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
DRV8412, DRV8432
SLES242G – DECEMBER 2009 – REVISED DECEMBER 2014
DRV84x2 Dual Full-Bridge PWM Motor Driver
1 Features
1 High-Efficiency Power Stage (up to 97%) With Low RDS(on) MOSFETs (110 mΩ at TJ = 25°C)
Operating Supply Voltage up to 52 V
DRV8412 (Power Pad Down): up to 2 × 3-A Continuous Output Current (2 × 6-A Peak) in Dual Full-Bridge Mode or 6-A Continuous Current in Parallel Mode (12-A Peak)
DRV8432 (Power Pad Up): up to 2 × 7-A Continuous Output Current (2 × 12-A Peak) in Dual Full-Bridge Mode or 14-A Continuous Current in Parallel Mode (24-A Peak)
PWM Operating Frequency up to 500 kHz
Integrated Self-Protection Circuits Including Undervoltage, Overtemperature, Overload, and Short Circuit
Programmable Cycle-by-Cycle Current Limit Protection
Independent Supply and Ground Pins for Each Half Bridge
Intelligent Gate Drive and Cross Conduction Prevention
No External Snubber or
Schottky Diode is Required
The DRV841x2 requires two power supplies, one at 12 V for GVDD and VDD, and another up to 50 V for PVDD. The DRV841x2 can operate at up to 500-kHz switching frequency while still maintaining precise control and high efficiency. The devices also have an innovative protection system safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are shortcircuit protection, overcurrent protection, undervoltage protectio...